TASCAM CD player commercial use CD-200

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Adopts high-quality in-house audio CD drive Compatible with many audio formats Equipped with 10 seconds of shock-proof memory to avoid skipping. ●The CD-200 series is equipped with an in-house audio-specific CD drive. High reliability has been achieved by installing a drive developed in-house. ●Since it supports playback of not only audio CDs but also data CDs with data such as MP3s written on them, it can be used with confidence even in facilities where you do not know what kind of files will be brought in. ●Equipped with a 10-second shock-proof function to avoid skipping due to vibrations, etc. If the vibration lasts less than 10 seconds, the data stored in the device's memory will be played back, so the sound will not cut out and accidents can be avoided. 【specification】 Disc used: CD/CD-ROM/CD-R/CD-RW (12cm/8cm) disk format Audio CD: CD-DA Data CD (CD-ROM): ISO9660 level 1/level 2, Joliet/Romeo (extended format) Playable format CD-DA Sampling frequency: 44.1kHz

Quantization bit number: 16 bits Number of channels: 2 channels

WAV Sampling frequency: 8/11.025/12/16/22.05/24/32/44.1/48kHz Quantization bit number: 8 bits/16 bits Number of channels: 2 channels/1 channel

MP3

MPEG1 Audio Layer3 ID3 tag (Ver.1.0~2.4) support Audio mode: STEREO, JOINT STEREO, DUAL CHANNEL, MONO Sampling frequency: 32/44.1/48kHz Bitrate: 32kbps to 320kbps, VBR playback compatible

*MP3 files created with VBR cannot be accurately detected due to format restrictions, so there may be a slight discrepancy between the setting point and the point at which playback starts when pausing or searching for fast forward/reverse. analog output Unbalanced output: RCA pin jack Standard output level: -10dBV Maximum output level: +6dBV Output impedance: 200Ω digital output COAXIAL output: RCA pin jack Format: IEC60958-3 (S/PDIF) OPTICAL Output: Optical Format: IEC60958-3 (S/PDIF) Headphone output: stereo phone jack Rated output: 20mW + 20mW or more (at 32Ω load) Frequency response: 20Hz to 20kHz, +/-1dB Distortion rate: 0.01% or less (1kHz, 20kHz LPF) S/N ratio: 90dB or more (20kHz LPF, A-WTD) Dynamic range: 90dB or more Channel separation: 90dB or more (1kHz, 1kHz BPF) Power supply: AC100V, 50/60Hz Power consumption: 7W External dimensions: 481 (width) x 94.5 (height) x 298 (depth) mm Mass: 4.2kg Operating temperature: 5-35℃ Inclination during installation: within 5 degrees remote control Unit operation range: within 7m from the front, within 7m from left and right within 15 degrees Accessories: Wireless remote control (RC-CD200)