Panasonic Rechargeable Drill Driver 18V Battery Pack X Included Dual Tap Mode Equipped IP56 Black 5.0Ah 2/Charger/Case (14.4V/18V Compatible)

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- Maximum tightening torque: [Rigid body tightening torque] 18V = low speed 50N･m, 14.4V = low speed 40N･m, [elastic body tightening torque] 18V = high speed 12N･m, low speed 32N･m, 14.4V = high speed 10N･m, low speed 28N･m Body size: width 18.9 x depth 6.8 x height 25.4 Weight: 2g Accessories: Battery pack x 2, quick charger, large capacity storage case Rotation speed: 18V = high speed 70-1,800 rpm, low speed 30-530 rpm, 14.4V = high speed 70-1,450 rpm, low speed 30-430 rpm Clutch operating torque: 18 steps (approximately 0.5 to 4.4N･m in approximately 0.23N･m increments) Chuck: Keyless chuck (Φ1.5~13mm) Capacity: [Drilling/18V5.0Ah] (HIGH mode) Hole saw SPC (Φ21×1.6mm) = approx. 45 holes, (HIGH mode) Woodworking/Japanese pine (Φ15×120mm) = approx. 240 holes, ( HIGH mode) Woodworking/Japanese pine (Φ21 x 120mm) = Approx. 150 holes, (HIGH mode) Wooding core drill (Φ65 x Ceramic siding 16mm + Plywood 12mm) = Approx. 45 holes Capacity: [Drilling/18V3.0Ah] (HIGH mode) Hole saw SPC (Φ21×1.6mm) = approx. 25 holes, (HIGH mode) Woodworking/Japanese pine (Φ15×120mm) = approx. 140 holes, (HIGH mode) Woodworking/Japanese pine (Φ21 x 120mm) = Approx. 90 holes, (HIGH mode) Wooding core drill (Φ65 x Ceramic siding 16mm + Plywood 12mm) = Approx. 30 holes Capacity: [Drilling/14.4V5.0Ah] (HIGH mode) Hole saw SPC (Φ21 x 1.6mm) = Approx. 35 holes, (HIGH mode) Woodworking/Yone pine (Φ15 x 120mm) = Approx. 160 holes, (HIGH mode) Woodworking/ Rice pine (Φ21×120mm) = approx. 100 holes Capacity: [Screw tightening/18V5.0Ah] (HIGH mode) Wood screws/Japanese pine Φ4.1 x 25mm = approx. 1,550 pieces, (HIGH mode) Coach screws/Japanese pine M6 x 80mm = approx. 30 0 pieces, [Screw tightening/18V3.0Ah] (HIGH mode) Wood screws, Japanese pine Φ4.1 x 25 mm = approx. 950 pieces, (HIGH mode) Coach screws, Japanese pine M6 x 80 mm = approx. 180 pieces